Round Marble Table on a Fabricated Steel Pedestal Base

Project Overview

A round dining table built around a fabricated steel pedestal base. The base carries a solid stone top, so the whole piece had to be stiff enough to sit flat and stay flat, with nothing visible under the top that would interfere with knees or chairs.

Everything metal here was cut, welded and finished in our shop.

What We Built

• A pedestal frame made from two square steel uprights joined top and bottom into one open rectangle
• A four-arm cross foot welded across the bottom of the frame, with the arm ends cut back on an angle
• A top plate at the head of the frame to spread the load into the underside of the stone
• Welds ground and dressed flush so the frame reads as continuous rather than assembled
• A matte black finish over the full base

Why It Was Built This Way

A single centre column would have been the simpler thing to make, but a round stone top wants a wide footprint underneath it. The four-arm cross spreads the bearing across the floor and keeps the table from rocking, while the arms stay narrow enough that chairs pull in without catching.

The open rectangle above the cross does the structural work. It gives the base its resistance to twisting without adding bulk, which is why the piece looks light from across the room and feels solid when you lean on it.

The welds were dressed flush before finishing. On furniture the joints sit at eye level and get touched, so a bead left proud reads as unfinished no matter how sound it is.

Project Gallery

Bases like this one are built to the top they carry; if you would rather start from a catalogue reference, our table legs and bases page lists the standard profiles and heights.