Metal Fabrication Services
Fabrication, welding and installation from our North Vancouver shop, with cutting, bending and coating coordinated through specialist partners.
Most metal projects fail in the gaps between trades: the fabricator blames the installer, the installer blames the drawing. We removed the gaps by managing the whole chain ourselves — we measure, fabricate, weld and install, and coordinate the CNC plasma cutting, sheet bending and coating done by specialist partners. Below is what we do; each service page covers the detail, and a free in-house consultation is the fastest way to get a real number.
Welding
Welding of steel, stainless steel and aluminum in our North Vancouver shop, for new fabrication, modifications and repairs. Shop fabrication, weld repairs and one-off parts built from your drawing or your sample.
Mobile Welding
On-site welding across Vancouver, Burnaby and the North Shore for work that cannot be removed — gate hinges, railing posts, structural connections and emergency repairs.
Metal Bending
Press brake forming for sheet and plate. Panels, brackets, channels and custom profiles bent to your angles and tolerances.
Laser Cutting
Flat parts and panels cut from your file through specialist subcontractors, checked when they arrive, and supplied as cut or fabricated in our shop.
Waterjet Cutting
Mild steel, stainless steel and aluminum parts cut by waterjet from your file, through a specialist subcontractor sourced for each project; supplier suitability, specification, price and date are confirmed before the final order.
CAD Models and Fabrication Drawings
3D models and fabrication drawings prepared in-house, with cut files where agreed in the quote, ordered on their own or with a fabrication order. Not engineering or stamped design.
Installation
Site measurement, delivery and professional installation of railings, gates, stairs and structural steel — anchored correctly and ready for inspection.
Countertop Support Frames
Steel frames, legs and hidden supports for quartz and stone islands, overhangs and floating counters, installed with the plywood substrate before your stone fabricator templates. Countertop support frames.
Custom Brackets and Small Parts
Shelf, counter, desk, beam and mounting brackets, plates and small parts made to your dimensions, singly or in batches. Custom brackets.
Enclosure and Panel Modifications
Cut-outs, back plates and covers for empty or unwired electrical and control enclosures and supplied panels. Mechanical metalwork only. Enclosure and panel modifications.
Shop Fabrication or On-Site Work
Almost every job we take on is one or the other, and knowing which yours is changes the cost more than anything else about it.
Shop work is better whenever the piece can travel. Better access, better position, better fit-up, proper distortion control and a real finish afterwards. If something can be removed and brought in, that is usually the cheaper and better job — and we will tell you when that applies rather than charging for a site visit that produces a worse result.
Site work is for what cannot move: something structural, something bolted into a building, or something that would cost more to remove and reinstate than to repair in place. That brings its own constraints — access, power, hot-work procedures, protection of finishes and the building’s own rules — and those are worth agreeing before anyone is scheduled.
From Drawing to Installed
The sequence is the same whether the job is a single bracket or a full elevation of guardrail, and knowing where you are in it helps.
Site visit and measurement. We measure what is actually there rather than working from a drawing, and on a renovation the difference between the two is routine. This is also where we establish what the piece will fix into.
Shop drawings, where the project needs them. Dimensions, profiles, connections, fixings and finishes, issued for review before anything is cut. Where structural design or a professional seal is required, that comes from a qualified engineer engaged for the project — we fabricate to it.
Fabrication. Cutting, forming, welding, dressing and assembly, in the sequence that controls distortion and keeps marks off the show faces.
Finishing. Galvanizing and powder coating are carried out by specialist applicators rather than in our shop, and we coordinate that stage. It is also the part of the schedule that is least within our control, which is why we quote it honestly rather than optimistically.
Installation. Delivery, fixing, adjustment and making good — with the sequence agreed against whatever else is happening on site.
What We Do Not Do In-House
Worth stating plainly, because it affects lead times and because some shops are vague about it. Hot-dip galvanizing, powder coating, laser, waterjet and CNC plasma cutting, pattern cutting of perforated and decorative panels, and sheet bending are carried out by specialist suppliers and applicators, and we coordinate that work as part of the job. Structural engineering and professional seals come from a qualified engineer engaged for the project. Gate automation, access control and electrical work are supplied and commissioned by your automation or electrical contractor.
None of that is unusual — it is how custom architectural metalwork is normally produced — but you should know it, because a piece with a complex cut pattern and a duplex finish moves through more hands than a plain welded one and the schedule reflects that.
Who We Work With
Homeowners and home builders, strata corporations and property managers, commercial property owners, industrial operators, developers and general contractors, and architects, landscape architects and interior designers working from drawings. We work from our North Vancouver shop across Metro Vancouver; see service areas.
Tell Us What the Problem Is
For a fabrication enquiry, describe the problem rather than the solution — what has failed, what has to be made, or what a drawing calls for. Photographs of the actual item and its failure are worth more than any description, and they prevent almost every wasted site visit. If you already know which service you need, the pages above have the detail.
Not sure which service you need?
Most projects use two or three of these together. Book a free in-house consultation and we will scope it properly — request a quote or call (778) 805-5333.