Custom Stainless Steel Tables and Work Surfaces
Prep tables, counters, benches and shelving made to the size of your space, in 304 and 316 stainless, fabricated in our North Vancouver shop.
Catalogue stainless tables come in fixed sizes. Kitchens, bars, labs and workshops rarely do. We build stainless steel tables, counters and shelving to the dimensions you actually have, with the height, backsplash, edges and undershelf the job needs, and we deliver and install them across Metro Vancouver.
Made to Size
When a table has to fit between two appliances, wrap around a column, sit under a window or run along an odd wall, a standard width leaves a gap or doesn’t fit at all. We measure the space, confirm the dimensions with you and build to them, so the table lines up with the equipment and walls around it.
What We Make
- Prep and work tables with undershelves.
- Counters and work surfaces with backsplashes and turned-down edges.
- Wall shelving, overshelves and pot racks.
- Outdoor kitchen counters and BBQ surrounds in 316.
- Workshop, lab and packing benches.
- Replacement tops for existing bases, and tables built to match ones you already have.
Wash basins for dogs in strata amenity rooms, clinics and grooming shops are on stainless pet-wash basins.
Who We Build For
Restaurants, cafés and bars fitting out or replacing back-of-house pieces (see restaurant and hotel metalwork), shops and commercial spaces (commercial metalwork), labs and workshops that need a clean, hard-wearing bench, and homeowners building an outdoor kitchen.
Materials and Details
- 304 stainless for kitchens and interiors; 316 outdoors and near salt water.
- Sheet thickness and frame section chosen for the span and the load. We list both on the quote.
- Brushed finish, with welds ground, blended and cleaned.
- Backsplashes, turned-down or marine edges, and cut-outs for sinks or equipment to your drawing.
For how the grades compare and where stainless makes sense, see stainless steel fabrication.
Legs, Feet and Mobility
- Adjustable feet to level the table on uneven floors.
- Locking casters where the table needs to move for cleaning.
- Bolt-down feet or wall-mounted brackets where it has to stay put.
A Note on Certification
Our tables are custom fabricated, not NSF-listed catalogue products. If your health inspector, landlord or insurer requires a listed product for a particular station, check with them before ordering a custom table and we’ll tell you where a standard unit may be the better choice.
Repairs and Modifications
We also cut down, extend, reinforce and repair existing stainless tables and shelving, and replace damaged tops. See restaurant and commercial stainless repair.
Delivery and Installation
We deliver and install in Metro Vancouver: levelling the tables, fixing wall shelving into the structure and fitting pieces tight to walls and equipment. See installation.
How to Request a Quote
- Length, depth and height, or a sketch with dimensions.
- What the table is for and roughly what goes on it.
- A photo of the space.
- Backsplash, undershelf, edges, cut-outs, feet or casters.
- Indoor or outdoor, and how many you need.
Questions We Get Asked
Can you build a table to an exact size?
Yes. That’s the reason to go custom. We build to your dimensions and confirm them with you before we cut.
Should I choose 304 or 316 stainless?
304 is the standard for kitchens and interiors. 316 costs more and resists salt and chlorides better, so we use it outdoors and near the water.
Can you add a backsplash, sink cut-out or undershelf?
Yes. Backsplashes, turned-down edges, cut-outs for sinks or equipment and undershelves are all built to your drawing.
Are your tables NSF certified?
No. They’re custom fabricated, not NSF-listed catalogue products. If a listed product is required for a station, check with your inspector before ordering.
Can you repair or modify a stainless table we already have?
Yes. We cut down, extend, reinforce and repair existing stainless tables and shelving.
Send Us Your Dimensions
Send the dimensions, a photo of the space and what the table is for to sales@trussmetal.com, request a quote online, or call (778) 805-5333.